Use&Features
automatic soft gelatin encapsulation machine is a new generation of
roller die type water cooling type soft gelatin encapsulation
machine that optimized designed and precise manufactured on the
basis of foreign latest technology. Its main technical index reach
to the international advanced level and conforms to the GMP
standard.
consists of main machine, gelatin melting tank, insulated
gelatin storage tank, electric control cabinet, conveyor,
shape/drying rotary cage, colloid mill etc. The working principles:
put the oil, gelatin-insoluble liquid, paste, plaster (e.g. extract
plaster from Chinese herbs) inject into between two gelatin skin
quantificationally, through the two roller dies and press and
cutting into various shape soft capsules, such as egg shape, fish
shape, cylinder, ball shape, calabash shape. The product is widely
used in pharmaceutical, cosmetic, health food and pesticide etc.
This production line possess the following ten merits:
· The water cooling type eliminate the dust contamination
caused by the air cooling.
· Optimization design the roller die, increase the output of
30--40% than the model RG2-150 (6 inch roller dies) meanwhile
enhance the utilization ratio of gelatin.
· The gelatin conveyance of insulated gelatin storage tank
adopt air pressure type through the ground, which improves the
production environment.
· The capsule conveyance belt adopt food-grade conveyance belt
(FDA approved) produced by Lexno Corporation (USA) which is
non-toxic, non-sticky, and easy to wash.
· The shape and drying rotary cage is made of stainless steel
net sheet, which is no dead corners and easy to wash.An oil basin
placed under the rotary cage to ensure there is no oil drops during
the production.
· All the electric parts adopt well-known brand in the world,
the performances is stable.
· The 10-station and 14-station injection rod equipped with
the machine, it can use the width of roller dies while producing
the small dosage products, enhances the utilization ratio of
gelatin and output.
· It is convenient and prompt that adjusting the clearance of
two roller dies by air pressure.
· The improved capsule-peeling unit minimizes the probability
that the waste gelatin skin enwind onto the gelatin-peeling rod.
· The S.S that contact with the medicine adopt superior S.S
304# and 316L# except the injector, the gelatin spreading box,
roller die conveyance belt adop special material. It is conform to
GMP standard completely.
Technical Parameters
model of machine | MHSC-100 | MHSC-150 | MHSC-180 |
die roll speed | 0-5/min | 0-5/min | 0-5/min |
dir roller dimension | Ø85*100mm | Ø102*152mm | Ø103*1180mm |
single piston pump material supplied | 0-0.81ml | 0-1.5ml | 0-2ml |
power supply | 380V 0.75Kw
220V 0.75Kw | 380V 1.1Kw
220V 0.8Kw | 380V 1.5Kw
220V 1.9Kw |
noise target | <75dBA | <75dBA | <75dBA |
overall dimensions | 850*750*1500mm | 800*750*1920mm | 1100*120*2200mm |
Net weight of machine | 400kg | 800kg | 980kg |
